Join our loyalty club and save at least 5% on every order!

Join our FREE loyalty club now and you'll save at least 5% off every order (including your first!)

For every £1 you spend with Crafter's Companion, you'll receive one Loyalty Point. The more points you have, the bigger and better your benefits will be.

It's that simple.

If you're already a member of our loyalty club, click below to login!

Login

To find out more about these benefits or to join our Loyalty Club, click here.

Club Inspire

Sara Signature Collection Traditional Christmas Tutorial

Hi Guys! I thought I'd do another tutorial write up for you as I'm on my way back from the Hochanda studios....I love making these cards for the shows. Prepping is so much fun...especially when it allows me to make my visions a reality! Here's a step by step on how to create this really classy card using my new Traditional Christmas Collection!!!!

IMG_8868

How to create:

Step 1: Trim the Sheena Stamping card into a 7'' square then place the 3 outer bauble dies onto the card...and pop through your machine!

IMG_8860

2. Apply stick it to the back of gold mirror card, then die-cut 3 baubles and the sentiment.

IMG_8861 (2)

3. Matt and layer black card 7 1/2" square onto an 8x8" card blank, then using foam pads, affix aperture card to the front.

IMG_8865 (2)

4. Adhere the gold baubles into their spaces, then attach the sentiment. Affix ribbon and a bow to each bauble to finish.

IMG_8876

Crafty Stash Used:

If you're still wondering who won my show sample cards from the launch show visit my tutorial from yesterday! Names are on there! I hope you have fun making this classy card!

Lots of love & Christmas hugs...Sara xxxx

4 thoughts on “Sara Signature Collection Traditional Christmas Tutorial”

  • Anne Mette

    Thank you for at beautiful tutorial

    Reply
  • Gill

    Hi Sara

    Yet another stunning card - I cannot wait to get my craft mits on the signature collection to create masterpieces like this one.

    Love Gill xxxx

    Reply
  • Robina Felker

    Sara, I recently purchased a gemini from HSN. I was using a lg die and did the cutting. only used the plastic shim but it sounded like it was too much. cut the plastic shim. When I went to emboss the die it cut the rubber mat. I place everything according to the stack list in the booklet. It has the rubber mat on top of the card stock that is on top of the die. It cut the rubber mat. What did I do wrong?

    Reply
  • Robina Felker

    I forgot how will I be able to get anther rubber mat for the New Gemini

    Reply
Leave a Reply

For fresh ideas, inspiration, special offers and promotions, please sign up to our newsletter, enter your email below: